<?xml version="1.0" encoding="UTF-16"?>
<SoftwareComponent schemaVersion="1.0" packageID="R159730" releaseID="R159730" dateTime="2007-08-15T14:23:28-05:00" releaseDate="August 15, 2007" vendorVersion="1614" dellVersion="A12" packageType="LLXP" xmlGenVersion="1.0.3555">
  <Name>
    <Display lang="en"><![CDATA[Dell PowerVault 110T LTO, v.1614, A12]]></Display>
  </Name>
  <ComponentType value="FRMW">
    <Display lang="en"><![CDATA[Firmware]]></Display>
  </ComponentType>
  <Description>
    <Display lang="en"><![CDATA[Dell PowerVault 110T LTO, v.1614, A12]]></Display>
  </Description>
  <LUCategory value="NONE">
    <Display lang="en"><![CDATA[Not Available]]></Display>
  </LUCategory>
  <Category value="TH">
    <Display lang="en"><![CDATA[Tape Devices]]></Display>
  </Category>
  <SupportedDevices>
    <Device componentID="1048" embedded="0">
      <Display lang="en"><![CDATA[PowerVault 110T LTO]]></Display>
    </Device>
  </SupportedDevices>
  <InstallInstruction fileName="TAPE_FRMW_LX_R159730.BIN" typeCode="LLXP">
    <Display lang="en"><![CDATA[Dell Update Package Instructions for TAPE_FRMW_LX_R159730.BIN:

Installation
1. Read over the release information presented by executing the "./TAPE_FRMW_LX_R159730.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. If it is a BIOS update package, install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./TAPE_FRMW_LX_R159730.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
]]></Display>
  </InstallInstruction>
  <RevisionHistory>
    <Display lang="en"><![CDATA[resolved issue with inventory collection to properly detect devices.]]></Display>
  </RevisionHistory>
  <ImportantInfo URL="http://support.dell.com/support/downloads/format.aspx?releaseid=R159730&amp;c=us&amp;l=en&amp;s=gen&amp;cs">
    <Display lang="en"><![CDATA[**Note a restart of the system is required to complete the firmware update process.

The linux application requires a minimum version of RHEL 3.0 with GCC 3.2.3 libraries or SLES9 Enterprise edition. For systems that have tape drives running earlier versions of Linux, please use a system that has the new Linux version or a Windows system to perform the drive update.  ]]></Display>
  </ImportantInfo>
  <Criticality value="1">
    <Display lang="en"><![CDATA[Recommended-Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).]]></Display>
  </Criticality>
</SoftwareComponent>