Logical Connector Properties And Tasks

To display the information about the logical connector (connector in redundant path mode) and to execute connector tasks, use the logical connector properties and tasks page.

The connector properties can vary depending on the model of the controller. Connector properties may include:

Table 28. Logical Connector Properties
Property Definition
These icons represent the severity or health of the storage component.

Normal/OK

Warning/Non-critical

Critical/Failure/Error

For more information, see Storage Component Severity.

A Warning or Critical severity may indicate that the connector is unable to communicate with attached devices such as an enclosure. Check the status of attached devices. For more information, see Cables Attached Correctly and Isolate Hardware Problems.

Name Displays the connector number, usually 0.
State Displays the status of the connector. Possible values are:
  • Ready — The connector is functioning normally.
  • Degraded — The connector has encountered a failure and is operating in a degraded state.
  • Failed — The connector has encountered a failure and is no longer functioning.
Connector Type Displays whether the connector is operating in RAID mode. The connector is always a SAS connector.