<?xml version="1.0" encoding="UTF-16"?>
<SoftwareComponent schemaVersion="1.0" packageID="R137019" releaseID="R137019" dateTime="2006-11-20T14:01:44-06:00" releaseDate="November 20, 2006" vendorVersion="3200" dellVersion="A13" packageType="LLXP" xmlGenVersion="1.0.2378">
  <Name>
    <Display lang="en"><![CDATA[Dell PowerVault 110T DLT VS160, v.3200, A13]]></Display>
  </Name>
  <ComponentType value="FRMW">
    <Display lang="en"><![CDATA[Firmware]]></Display>
  </ComponentType>
  <Description>
    <Display lang="en"><![CDATA[This release includes new firmware for the VS160 Tape Drive.  This will replace any previous releases.  Firmware will update to version 3200 (v50).  This release includes DFU and DUP.

The DFU utility is used to flash the firmware for Windows, Linux, and Netware one drive at a time.

The DUP (Dell Update package) utility is used to automatically update all supported tape devices at once with minimum user interaction.
]]></Display>
  </Description>
  <LUCategory value="NONE">
    <Display lang="en"><![CDATA[Not Available]]></Display>
  </LUCategory>
  <Category value="TH">
    <Display lang="en"><![CDATA[Tape Devices]]></Display>
  </Category>
  <SupportedDevices>
    <Device componentID="5301" embedded="0">
      <Display lang="en"><![CDATA[PowerVault 110T DLT VS160]]></Display>
    </Device>
  </SupportedDevices>
  <InstallInstruction fileName="TAPE_FRMW_LX_R137019.BIN" typeCode="LLXP">
    <Display lang="en"><![CDATA[Dell Update Package Instructions for TAPE_FRMW_LX_R137019.BIN:

Installation
1. Read over the release information presented by executing the "./TAPE_FRMW_LX_R137019.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. If it is a BIOS update package, install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./TAPE_FRMW_LX_R137019.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
]]></Display>
  </InstallInstruction>
  <RevisionHistory>
    <Display lang="en"><![CDATA[Fixes and Enhancements included in firmware version 3200 v50:
1. Addresses condition which can lead to a stuck tape scenario when the eject button is pressed in certain unusual sequences.  
2. Prevents the EEROM from being reset when a high number of spurious power glitches occur.
3. Adds support for Tape Alert Flags 20 and 21.
4. Uses the tach sensor more efficiently to extend its life. ]]></Display>
  </RevisionHistory>
  <ImportantInfo URL="http://support.dell.com/support/downloads/format.aspx?releaseid=R137019&amp;c=us&amp;l=en&amp;s=gen&amp;cs">
    <Display lang="en"><![CDATA[** A system reboot will be required to complete the Firmware update process.

** Firmware tools for Linux require GCC 3.2.3 or later in order to function properly.]]></Display>
  </ImportantInfo>
  <Criticality value="1">
    <Display lang="en"><![CDATA[Recommended-Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).]]></Display>
  </Criticality>
</SoftwareComponent>