<?xml version="1.0" encoding="UTF-16"?>
<SoftwareComponent schemaVersion="1.0" packageID="R146227" releaseID="R146227" dateTime="2007-01-23T10:05:38-06:00" releaseDate="January 23, 2007" vendorVersion="0033" dellVersion="A01" packageType="LLXP" xmlGenVersion="1.0.2378">
  <Name>
    <Display lang="en"><![CDATA[Dell PowerVault RD1000 Internal (5.25), PowerVault RD1000 Internal (3.5), v.0033, A01]]></Display>
  </Name>
  <ComponentType value="FRMW">
    <Display lang="en"><![CDATA[Firmware]]></Display>
  </ComponentType>
  <Description>
    <Display lang="en"><![CDATA[This release supports both 3.5" and 5.25" form factor versions of the RD1000 internal SATA device.

This release will update the firmware on all RD1000 internal SATA drives connected to your system.
]]></Display>
  </Description>
  <LUCategory value="NONE">
    <Display lang="en"><![CDATA[Not Available]]></Display>
  </LUCategory>
  <Category value="TH">
    <Display lang="en"><![CDATA[Tape Devices]]></Display>
  </Category>
  <SupportedDevices>
    <Device componentID="12731" embedded="0">
      <Display lang="en"><![CDATA[PowerVault RD1000 Internal (5.25)]]></Display>
    </Device>
    <Device componentID="13498" embedded="0">
      <Display lang="en"><![CDATA[PowerVault RD1000 Internal (3.5)]]></Display>
    </Device>
  </SupportedDevices>
  <InstallInstruction fileName="TAPE_FRMW_LX_R146227.BIN" typeCode="LLXP">
    <Display lang="en"><![CDATA[Dell Update Package Instructions for TAPE_FRMW_LX_R146227.BIN:

Installation
1. Read over the release information presented by executing the "./TAPE_FRMW_LX_R146227.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. If it is a BIOS update package, install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./TAPE_FRMW_LX_R146227.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
]]></Display>
  </InstallInstruction>
  <RevisionHistory>
    <Display lang="en"><![CDATA[This release has been updated to include the DUP 5.2 framework. 
This is the only change from the previous A00 release which was based on the DUP 5.1 framework.]]></Display>
  </RevisionHistory>
  <ImportantInfo URL="http://support.dell.com/support/downloads/format.aspx?releaseid=R146227&amp;c=us&amp;l=en&amp;s=gen&amp;cs">
    <Display lang="en"><![CDATA[]]></Display>
  </ImportantInfo>
  <Criticality value="1">
    <Display lang="en"><![CDATA[Recommended-Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).]]></Display>
  </Criticality>
</SoftwareComponent>