Dell OpenManage 7.0 Ubuntu Repository

This is the community supported Dell OpenManage 7.0 repository for 64-bit Ubuntu 10.04 or later versions, as well as Debian Squeeze and Wheezy (pre-release). Debian Wheezy users will need to get libssl0.9.8 from Debian Squeeze or unstable. For PowerEdge 12G servers, it is highly recommended that you are running Ubuntu 12.04 or later. Below, you will find instructions to install and setup OpenManage command-line and web interfaces.

IMPORTANT NOTE FOR UPGRADING:

If you are upgrading, in step 4, you must use "apt-get install <meta-package name>" or "apt-get dist-upgrade". Do not use "apt-get upgrade", as doing so will not upgrade all the necessary packages.

Installation/Upgrade:

1.  (Optional for Upgrade) Create a new file ending in 'sources.list' in the '/etc/apt/sources.list.d' directory. Cut and paste the command below. (If typing by hand, note carefully the spacing.)

echo 'deb http://linux.dell.com/repo/community/deb/latest /' | sudo tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list

2.  To authenticate OMSA packages, add the repository key to apt. Note that you must re-do this step if upgrading from OMSA 6.5 because a new key is being used.

gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F

gpg -a --export 1285491434D8786F | sudo apt-key add -

3.  Make apt aware of the new software repository by issuing the following command:

sudo apt-get update

4.  Install one of the following selection of meta-packages to install the OMSA functionality you require:

srvadmin-all:Install all OMSA components

srvadmin-base:Install only base OMSA, no web server

srvadmin-rac4:Install components to manage the Dell Remote Access Card 4

srvadmin-rac5:Install components to manage the Dell Remote Access Card 5

srvadmin-idrac:Install components to manage iDRAC

srvadmin-idrac7:Install components to manage iDRAC7

srvadmin-webserver:Install Web Interface

srvadmin-storageservices:Install RAID Management

For example, to install complete OMSA: sudo apt-get install srvadmin-all

If you are upgrading, you must use apt-get install or apt-get dist-upgrade. Do not use apt-get upgrade, as doing so will not upgrade all the necessary packages.

CLI:

1. sudo service dataeng start

2. Now, you can use omreport, omconfig, and omhelp commands.

3. For example, you can issue omreport system summary to get details about your system.

4. You can use omconfig to configure component properties.

5. omhelp provides help information for commands.

6. See OpenManage CLI User's Guide for comprehensive documentation.

Web Interface:

To use web interface, users with appropriate permissions need to be added.

     1.  Add users with appropriate permissions to /opt/dell/srvadmin/etc/omarolemap file. See detailed information at Setup and Administration

         Example:john_doe     *     Administrator

     2.  Start the web server.

         sudo service dsm_om_connsvc start

     3.  Go to https://<ip_address>:1311/ in your browser to access OMSA.

     4.  If you want to start dsm_om_connvsc service at boot, issue sudo update-rc.d dsm_om_connsvc defaults command.

Removal

Uninstall all packages: sudo apt-get --auto-remove remove srvadmin-all

Uninstall all packages including config files: sudo apt-get --auto-remove purge srvadmin-all

Documentation:

OpenManage 7.0 Documentation

OMSA 7.0 Manuals

Server Administrator Readme

Feedback:

For questions and feedback, please use linux-poweredge mailing list.

	Name	Last modified	Size	Description
	Parent Directory		-
	Packages	2012-10-29 23:15	63K
	Packages.gz	2012-10-29 23:15	13K
	Packages.bz2	2012-10-29 23:15	12K
	Release	2012-10-29 23:15	1.4K
	Release.gpg	2012-10-30 09:45	827
	i386/	2012-10-29 23:15	-
	amd64/	2012-10-29 23:15	-
	all/	2012-10-29 23:15	-